7+ Taskbar Tweaker for Windows 10 May 2019 Update

Another upcoming Windows 10 update, another post. According to Wikipedia, the May 2019 Update is expected to be released at the end of May. As any previous major update, it requires to do adjustments to 7+ Taskbar Tweaker.

I’ve just released the first beta version of the tweaker which adds experimental support for the Windows 10 May 2019 Update. It also adds some features to Windows 10 which were requested multiple times by users. Please let me know if you encounter any issues with the beta version.

Several users also asked me about support for the insider builds of Windows 10 Codename 20H1. I plan to add minimal support for it (see here for details about the meaning of “minimal support”), but probably not before releasing the stable version for the May 2019 Update.

Update (May 6): Turns out the new beta version works for Windows 10 Codename 20H1, too. Tested on build 18890.

Posted in Software, Updates by RaMMicHaeL at May 4th, 2019.
Tags:

74 Responses to “7+ Taskbar Tweaker for Windows 10 May 2019 Update”

  1. anon says:

    “Update (October 12)”: October 12? Is that a typo? πŸ˜€

  2. anon says:

    Do you plan to update 7+ Taskbar Numberer as well?

  3. Hj. Mathes says:

    I have Windows 10 version 1903 installed. Taskbar Twieker works with your beta version. Donated today, where can I get request code for experimental support of Windows 10 version 1903. If possible send to my e-mail address.
    regards
    Hj. Mathes

  4. James says:

    Hi, I have an access code for alpha versions, can I use it with the latest beta version: v5.6.2.3?

  5. Anoir Ben Tanfous says:

    Hi,

    I would like to suggest a feature that would make your app even better… When there is a window set fullscreen or top-most on windows and maximized… most of the time the taskbar when set to autohide (to save some space on screen and reduce visual clutter)… the Taskbar refuse to show and this is an issue that dates back to Windows 95 and MS didn’t manage to solve it since then…

    My suggestion is to add the WinApi function that set the taskbar to topmost and trigger the unhide if Windows doesn’t do it (also hide would be great to force it when the taskbar is stuck) and make the Stay or Wheel trigger one state or another…

    There is a software called Taskbar Activate and it’s the only one that I’ve found that solve this properly but it’s very outdated and his author is dead long time ago unfortunately… I managed to make it work even better and hide the line on the bottom but I just wish if I was a programmer so I will reverse engineer it and make a more modern version… (many photoshop users suffer from this issue since the taskbar when refuse to autohide it block the view of the tray which contains some useful information and it’s frustrating to have to change the taskbar to be always visible because of this and lose some screen space that is needed for softwares’ UI)

  6. dasb says:

    would like to request a feature for reverting the volume back to the Windows 7 style. I was able to do this with a registry tweak but it no longer works in 1903.

    • RaMMicHaeL says:

      The registry tweak still works, I just verified it with 1903. But the latest beta version of the tweaker uses the modern volume indicator for its volume scrolling events. I checked, and it doesn’t work well with the Windows registry option to disable the modern indicator. You can use the sndvol_classic advanced option of the tweaker to revert to the old behavior.

  7. Michael says:

    I often have many windows (hundreds). Is it possible for this app to fast scroll the entries, maybe with the mouse scroll? How can I make a feature request? Thank you.

    • RaMMicHaeL says:

      7+ Taskbar Tweaker has several options that can help you manage lots of windows. Some of them are:
      * The Taskbar Inspector. You can launch it from the tweaker’s options window or from the tray icon, by double/middle clicking the taskbar, and by other means (such as a keyboard shortcut) by adjusting it via the advanced options.
      * The “Cycle between taskbar buttons” option.
      * The multipage_wheel_scroll advanced option.
      * Custom grouping and combining.
      * And more, just play with the various options and see what fits your workflow.

  8. Difool2nice says:

    hi there ! lot of difficulties to open your website ! lot of issues, load slooooooooowwwwwly ! i must reload it several time and some links go to a cloudfare error page…

    • RaMMicHaeL says:

      Hi,
      I know that there are issues sometimes for some geographical locations. The proper solution would probably be to switch hosting, but I’m reluctant to do it for now, since it’s time consuming to move it all. As a workaround you can use a web proxy, there are plenty of those, Google for it.

  9. James says:

    Whats going on? When will you release the update for 1903? Or are you as usual dragging out on things to feed on the donations of inpatient people?

  10. Stop being rude #2 says:

    You should be happy you get this software for free at all. What specifically have you done to earn the end result of many manhours of labour of somebody else?

  11. Timothy says:

    Beta tester here! Thanks for this awesome tool! I love it.

    Noticing that tray_icons_padding has some unusual effects now. Setting it to “1” used to make the padding tight and perfect, but now the icons run together. I tried other values and found that larger values have more padding, and setting it to “8” seemed to look a lot like the previous version. However, if you lock your computer and unlock it, it looks weird again. Screenshots below.

    Set to 1: https://postimg.cc/8F7WxqG4
    Before unlocking, set to 8: https://postimg.cc/qzpKpt0z
    After unlocking, set to 8: https://postimg.cc/0b50NKnz

  12. Pablo says:

    Hello,
    I’m beta-testing version 5.6.2.3 on Win 1903, and I’m noticing that the Search window will always remain open even after clicking outside of it or some search result. I have to press the Escape key in order to close it.
    As soon as 7TT is closed, the search window can be closed normally.

    Thanks for all the effort!

    • RaMMicHaeL says:

      Hi Pablo,

      I tried, but wasn’t able to reproduce the issue. Can you reproduce it consistently, or was it a one time issue? Do you still have the issue if you turn off all of the tweaker’s settings? If not, can you enable them one by one and see which option causes the issue? Thanks.

  13. gundamhyl says:

    The donate version 5.6.2.4 completely don’t work in 20H1(190607), so sad, here are the errors:

    The instruction at 0x00007FFBA825AE4F referenced memory at 0x00000000000C02A0. The memory could not be read.

    7+ Taskbar Tweaker: Could not load library (5)

  14. Ron says:

    AVG is giving me the IDP.generic (ID Protection – Behavior Shield) on 7+ (5.7.0.0 6/29/19) after its latest self update.

    I’m pretty sure this is a false positive from a heuristics engine in AVG, but I’d feel better hearing from others that they’ve seen the same and enabled an exception for 7+ with no ill effects.

  15. That_Guy says:

    Recently updated. SMADAV recognizes it as a user virus, not sure if there is anything you can do, but I had to disable SMADAV as I’ve been using this tweaker for so long, I can’t live without it.

    Thanks for this program and all the work you’ve put into it.

  16. Iam says:

    It would be great if there was an option to launch a manually selected program by taskbar double and middle clicks.

  17. Studio says:

    I have the latest beta running on W10 Pro 1903 but unfortunately the taskbar reverts back to the wider (window standard size) every time I reboot. I’m looking in to a way to have make it a slim one. Many thanks in advance!

    • RaMMicHaeL says:

      You need to have the tweaker to run at startup. If it does, it makes the taskbar narrow every time it launches. Otherwise Windows reverts it to the default minimal width.

      • Studio says:

        Hi there, and thank you for your reply. I have it running with the Startup. I forgot to mention that I’d like the taskbar to placed on the right side of my right monitor. (I have a 3 monitor setup). However, if I place it there it doesn’t stay narrow it reverts back to the Windows minimal width. Any ideas?

        • RaMMicHaeL says:

          Can you post a screenshot of your vertical taskbar after it gets reset?

            • RaMMicHaeL says:

              Hmm, the width is correct. Basically, here’s how the option is supposed to work:
              * You enable the no_width_limit advanced options.
              * You resize the taskbar to be narrow.
              * The tweaker saves the width in the registry in this branch:
              HKEY_CURRENT_USER\Software\7 Taskbar Tweaker
              under the value: last_taskbar_width.
              * You restart the computer.
              * The last_taskbar_width value is read.
              * If the value exists, and if the taskbar’s width is system’s most narrow (62 pixels in Windows 10 with standard DPI), the taskbar is resized to the last_taskbar_width value.

              Now, your taskbar width is 62 pixels, so that’s OK. What about the last_taskbar_width value? Can you check whether you have it on your computer?

              • Studio says:

                Hi there and thank you for you replies. Much appreciated ! Ideally I’d like to have the taskbar to this width :

                https://postimg.cc/TpRZh5W1

                Here is the setting in the registry:

                https://postimg.cc/bs34nYQT

                Thank you again!

                • RaMMicHaeL says:

                  Everything looks correct – the value in the registry is 38, and so is the width of the taskbar on the screenshot. So the tweaker is supposed to resize the taskbar once it’s launched.

                  Try the following:
                  * Resize the taskbar to 38 pixels.
                  * Exit the tweaker.
                  * Enlarge the taskbar and then shrink it as much as you can. You should end up with a 62 pixels wide taskbar.
                  * Run the tweaker again.

                  The tweaker is supposed to resize the taskbar when it launches. If that doesn’t work, then I’m afraid I’m out of ideas. In this case I can send you a debug build of the tweaker and we can try to see why it doesn’t resize on your computer.

                  • Studio says:

                    Ah! I think you may have missed my original post. I am actually trying to do on one of my secondary monitors. I have a 3 monitor setup with the main one being in the middle. So I am actually trying to have the thin task bar on my right monitor on the right hand side.

                    That wouldn’t work right?

                    • RaMMicHaeL says:

                      Secondary taskbars are supported, but I haven’t tested a setup with more than one. Your screenshots show the main taskbar (I can see from the notification area), so I focused on that.

                      If the problem is with a taskbar different than the one on the screenshots, that’s another story πŸ™‚ did you resize the secondary taskbar? The last_secondary_taskbar_width entry should be created in the registry.

  18. Studio says:

    No no. I am using only 1 taskbar on my 3 monitor setup (Left – Main – Right) but I’d like it to be on the right monitor. It still resets back when I reboot though.

    Does it matter that monitor LEFT and RIGHT are different size (smaller) than the MAIN monitor ?

    • RaMMicHaeL says:

      Since you have only one taskbar, it shouldn’t matter how many monitors you have, and which of them has the taskbar, etc.

      Let’s get back to this comment of mine:

      Try the following:
      * Resize the taskbar to 38 pixels.
      * Exit the tweaker.
      * Enlarge the taskbar and then shrink it as much as you can. You should end up with a 62 pixels wide taskbar.
      * Run the tweaker again.

      Try to do that, and report whether it works, i.e. whether the taskbar shrinks after the tweaker is launched. If not, try to do the same with the taskbar unlocked. And if possible, try to do that with the external monitors detached.

  19. Anon says:

    It seems that your site has some virus. I have used your application or a long time and I’ll be forced to stop using it because it seems that the installations on your website have virus. Could you check that? Thanks a lot!
    https://www.virustotal.com/gui/ip-address/104.31.93.187/relations
    https://www.virustotal.com/gui/file/a56c5196bc336e3dfb1651cd35d2844818a581a88ec20d4aa63367bd19f302a9/detection

    • RaMMicHaeL says:

      First of all, that’s a false positive detection. False positives are unfortunately common for beta versions of 7+ Taskbar Tweaker which are not popular enough. Please see the FAQ here and this blog post.

      Also, the version that you linked, 5.6.2.3, is more than 3 months old and is not relevant anymore.

  20. Jamie Simon says:

    Hi, I’ve been using Taskbar Tweaker for YEARS and I love it. So first off, THANK YOU for writing such a great program. πŸ™‚

    A few months ago, I noticed that every time it tried to run, I would get an error. I see your post about the May update to W10. I honestly don’t remember when it started having problems, but it could well be associated with that.

    Anyway, per your suggestion, I downloaded the beta version. I uninstalled the original version and d/l beta. Upon install, I got an error message: Error opening file for writing, then it showed the path where it was trying to install. I had the option to abort, retry or ignore. Tried aborting and retrying, no dice. Retry did nothing, so I hit ignore. When it finished the install, I got an incompatibility warning, that an unsupported build of Windows 10 was detected, and that proceeding would lead to unexpected results. I proceeded anyway, and got the “could not load library” error that I see someone else got. I OK’ed out of it and got a popup saying an updated versions of Tweaker is available (strange, since I d/l the most current version from your website today), but when I hit update, it errored out.

    So… now you know what I know. LOL I’m not a programmer and don’t really know what else I can tell you to help figure out the issue, but I really, really miss being able to move my programs around on my taskbar.

    Anything you can recommend to fix the problem would be hugely appreciated.

    -Jamie

    • RaMMicHaeL says:

      THANK YOU for writing such a great program. πŸ™‚

      You’re welcome πŸ™‚

      Upon install, I got an error message: Error opening file for writing, then it showed the path where it was trying to install.

      What’s the path that you’re trying to install to? The default path should be writable to non-admin users, but if you chose a custom path when originally installing the tweaker (for example the Program Files folder), you might need to run the installer as administrator.

      I proceeded anyway, and got the β€œcould not load library” error that I see someone else got.

      What’s the exact error message? You should see a number along with the text.

      If you don’t mind resetting your settings, you can uninstall the tweaker and check the “Remove the tweaker’s settings” checkbox, then install it again. This should solve any issues you have, unless the issue is with your system.

      • Jamie Simon says:

        Well… I tried something different. I had been uninstalling through the app. Instead, I went into program manager today and uninstalled that way. It was odd that it was even there, since I’d uninstalled the day I posted this originally.

        Anyway, upon doing a complete uninstall and reinstall – yet again! – it appears to be working. YAY!!!

        Thanx so much for the response. If I have any further questions, I know where to come.

        I’m thrilled to be able to use this again. πŸ™‚

  21. John D. Blue says:

    Hi,

    Thank you very much for 7+ Taskbar Tweaker. I’ve used it a lot under Windows 7 Professional. Some days ago I’ve upgraded my Windows 7 Professional installation to Windows 10 Professional (1803). I and other users don’t like the highlighted line under the taskbar icons to running programs in Windows 10. For example see “How to get rid of the line under the taskbar icons ?”

    https://www.tenforums.com/general-support/9816-how-get-rid-line-under-taskbar-icons.html?s=61f4f742457c03281efb095656ce460e

    Or do a web search to “line under the taskbar icons”. I would appreciate it if this annoying underline could be deactivated over 7+ Taskbar Tweaker as well.

    Keep on the good work.

    Kind regards,
    John

  22. Carl Jahn says:

    Just a heads up – After installing KB4517211 for Windows 10 version 1903, 7+ Taskbar Tweaker no longer works. I got the old Could not load library message after the reboot.

    Uninstalled the update returns 7TT to normal operation.

  23. Robin says:

    I’m using the current version, v5.7, of 7+ Taskbar Tweaker on two Windows 10 Pro computers, one a custom-built desktop with a Gigabyte GA-Z87X-UDH3 motherboard and the other a Dell XPS 13-9360 laptop. Everything worked great until earlier today when I downloaded and installed the 2019-09 Cumulative Update for Windows 10 Version 1903 for x64-based Systems (KB4517211). Now, on both computers, when I try to run 7+ Taskbar Tweaker v5.7, I get an error dialog box with the following message: “7+ Taskbar Tweaker: Could not load library (1004)”. I love this little app and am very sad it’s no longer working. Please help!

  24. Amaury le Cour says:

    Hello,
    Is there a version for november 2019 (1909) ?
    If so, could you send me a link for it ?
    Regards

Leave a Reply